Why is my Sportreact pod(s) showing a blue screen?

If your Sportreact pods show a blue screen, it means they are in Setup Mode and ready to be connected to the Sportreact app. Follow the steps below to reset and reconnect them.

Step 1: Prepare the Pods

1. Leave the pod(s) that already shows a blue screen turned on.

2. For each of the remaining pods:

   • Press and hold the On/Off button.

   • The screen will first show a red plus (+) and the display will fill with a red box.

   • A green box will appear immediately after.

   • Release the button as soon as the green box appears.

3. The pod will turn off automatically.

4. Repeat this process for all remaining pods.

5. Once all pods are off, turn them all back on.

At this point, all pods should display a blue screen.

Step 2: Set Up the Pods in the Sportreact App

Once all pods are on and showing blue, follow these steps in the app:

1. Open the Sportreact app.

2. Tap Settings in the bottom menu.

3. Select Pods.

4. Tap Setup in the top-right corner.

Step 3: Connect the Pods

1. Tap Start at the bottom.

2. Tap Next and Next again.

3. The app will now detect the blue pods.
   
   

If you notice that the app does not detect a pod, a reset is required. Hold that pod's on/off button for 45 seconds. Once the time passes, release it. Follow the process above again to put the pod into setup mode and get the blue screen back.

Once the pods appear:

1. Tap Setup in the bottom-right corner.

2. Allow the app to connect to each pod.

During setup:

• Pod screens will turn green

• Each pod will eventually display a number

This indicates the setup was successful.

Step 4: Finish the Setup

1. Once all pods display a number, tap Connect in the bottom-right corner.

2. Tap Finish.

Your pods are now connected and ready to sync.

Step 5: Sync the Pods

To sync the pods with the app again:

1. Tap the Bluetooth icon in the top-right corner.

2. Tap SYNC at the bottom of the screen.

The pods will reconnect and synchronize with the app.